GuardRemover Eco Efflorescence & Cement
Efflorescence & Cement Remover
GuardRemover® Eco Efflorescence & Cement is a cleaning product for fast removal of efflorescence, cement, concrete and tartar deposits. Neither a corrosive nor an irritant, it’s much safer than the acids normally used. It’s much safer for the underlying surfaces. It is non-toxic, safe to use and biodegradable. Treated surfaces do not require neutralisation after cleaning.
Price is exclusive of GST & Shipping.
Trade & bulk order discounts available. (Click Here)
$80.00 – $290.00 (from ~ $3.19/m2)Compare
- Environment & Safety
- Data Sheets
- Reviews (2)
- Additional information
Guard Remover® Eco Efflorescence & Cement, by Guard Industry, is the efflorescence remover you’ve been looking for. This cleaning product quickly removes efflorescence, cement, concrete and tartar deposits. Yet it is mild enough that it will not damage underlying surfaces.
Strong acids are the basis for traditional cement and efflorescence removers. These products are cheap, but nasty! Strong acids can cause all kinds of damage. They are dangerous to use and can cause serious injury to the user. Plus they will quickly corrode any metal surfaces.
Strong acids penetrate deep into porous surfaces. As such, they are almost impossible to completely remove. Even with proper neutralisation processes. These absorbed acids will dissolve minerals in the substrate which will leach to the surface in time. Quite often, this creates worse problems such as iron (orange), vanadium (green), and manganese (black/blue) staining. Or even fresh efflorescence! What’s the point of an efflorescence remover that creates more efflorescence? Further, salts left behind from acid reactions cause additional problems. In particular chlorides can cause salt spall and even cause concrete cancer.
Guard Remover® Eco Efflorescence & cement is a new generation product that is significantly less hazardous than other products available in the market. Indeed, Guard Remover® Eco is not classified as either corrosive or an irritant. This cleaner has been designed in response to the increasing demands of users in terms of safety, eﬀectiveness, impact on the environment and protection of treated substrates.
Guard Remover® Eco does not require neutralisation after rinsing. So you get a quicker turn around, less risk and better results.
Do you have more cleaning to do? Please check out our other cleaners.
- Powerful stripper
- Quick efficiency
- Quick & easy to use
- No need to pH neutralize after rinsing
- Non corrosive & non irritant
- Ready to use
- Coverage: 3-6m2/litre
- Clean-up: Clean tools and equipment immediately after use with water
- Equipment needed: low pressure sprayer, brush or roller
- Odour: Lemon
Ideal to clean interior and exterior ﬂoors and walls. It can be applied to all types of substrates such as concrete, natural and synthetic stone, terracotta, tiling…
- Shake the product well before use and apply neat.
- Always test on a small hidden portion of the substrate before applying.
- Wet surface prior to applying.
- Apply the product liberally to the surface.
- Allow it to act 5 minutes maximum.
- Do not allow the product to dry prior to rinsing.
- Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush off using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same time.
Environment & Safety
Ecological and respects the environment:
- Water-based product
- Safe and non-toxic
- VOCs < 1 g/l*
- Surfactants used in this formula are biodegradable to 70%* in 28 days
5 Litre, 20 Litre
Guard Slip Resistant0 out of 5Select optionsCompare
GuardHardener W0 out of 5Select optionsCompare
Rejuvenate5.00 out of 5Select optionsCompare
Pro Primer 575 Concentrate0 out of 5Select optionsCompare
Wet Finish Premium5.00 out of 5Select optionsCompare
D’MossGuard Eco5.00 out of 5Select optionsCompare