ProtectGuard MG Marble and Granite Sealer
ProtectGuard MG is a ‘new generation’ stone sealer designed to protect substrates with very low porosity. It strongly repels water, oil, grease, weak acids (fruit juice, tomato sauce etc), and other general stains. In terms of stain resistance it sits right at the top of the ProtectGuard range. It outperforms most competitors products. Independent testing puts it well ahead of the likes of Dry Treat and Lithofin. When only the best will do, choose ProtectGuard MG!
ProtectGuard MG is highly water repellent. So it keeps substrates dry. This, in turn, prevents the growth of moss, mould and lichens.
ProtectGuard MG is ideal for protecting all dense low porosity materials. Such as:
- Polished and crystallised surfaces.
- Low porosity silica – limestone materials.
- All smooth mineral substrates.
- Densified and polished concrete.
ProtectGuard Marble and Granite sealer contains 90% active components, so you aren’t just paying for solvents. As a result it goes a long way. On dense surfaces coverage rates of up to 20m2 per litre are typical. It also comes with a 10 year performance guarantee. ProtectGuard MG provides outstanding value for money.
High Performance Marble Sealer
Penetrating very dense and crystallised materials is not easy. This makes them very difficult to seal properly. Marble, in particular, has a crystalline structure that is notorious for making good sealers look bad. So marble is a good testing material for high end sealers. If it performs well on marble it will work as well, if not better on everything else.
ProtectGuard MG has been designed specifically for marble and granite. That’s what the MG stands for, Marble & Granite. As such, it makes an excellent marble sealer. No matter whether the stone is honed, polished, or even crystallised. ProtectGuard MG will penetrate into the surface to provide long lasting protection.
ProtectGuard MG is a Breathable Sealer
ProtectGuard MG is suitable for both indoor and outdoor applications. Use for walls or flooring. It is a impregnating type sealer which does not create a surface film. Materials remain permeable to air and water vapour. This allows the surfaces to breathe. Surfaces stay clean and healthy. Moisture in the substrate can escape as water vapour without any negative impacts on the sealer. This is especially important where rising damp is an issue. Film forming sealers cannot breathe and will delaminate, blister and peel under such conditions.
ProtectGuard MG Granite and marble sealer is colourless. It generally does not change the look or texture of the treated material. However, on certain materials it can have a very slight darkening effect. Doing a small test is always recommended before doing a full application.
It has a high level of abrasion resistance, so its fine to use on floors. It is UV and frost resistant and does not discolour with age. Since it doesn’t produce a film on the surface it won’t alter the natural slip levels of the surface.
Need Something Different? There is a Protect Guard Sealer for All Types of Applications
ProtectGuard MG is a solvent based sealer designed for dense and low porosity materials. However, there is a Guard Industry Protect Guard Sealer to suit every application. For a water based, food contact compliant and extremely low VOC equivalent check out ProtectGuard MG Eco. For more porous materials consider using Protect Guard. For high traffic porous floors try Protect Guard HD. For colour enhancement consider Protect Guard WF Premium wet look sealer.
Not sure how porous your surface is? Do a water droplet test. Put a drop of water on the surface you want to seal. Then time how long it takes for the droplet to soak in. Check the time against our sealer selection chart.