Pro Seal 770 Concentrate
$250.00 – $600.00 (from ~ $1.26/m2 RRP)Compare
- Additional information
- Environment & Safety
- Data Sheets
- Reviews (2)
Pro Seal 770 is a pure acrylic polymer which is ideal for medium to high porosity sealing applications. This makes it an excellent limestone sealer. The polymer penetrates deep into the substrate and forms a strong but flexible matrix. This provides strength and stability to friable materials. These properties enable Pro Seal 770 to protect limestone and other soft materials from erosion and premature weathering.
Pro Seal 770 is also an great colour stabiliser. It will, therefore, enhance and prolong the colour fastness of all oxide coloured concrete materials. Pro Seal 770 is also cementitious compatible. This means it can be used as an admix for poured applications. Used as an admix binder for screeds and toppings it adds both strength and colour enhancement.
Pro Seal 770 is a very good, UV stable, primer. It has excellent bridging capabilities. It will fill up the larger pores in highly porous substrates. This will ensure final coats of Pro Seal 896 do not penetrate too deep into the material. Instead it will remain near the surface where it is most needed. As such using Pro Seal 770 as a pre sealer will result in better product coverage and lower total sealing costs.
Pro Seal 770 is not as stain and wear resistant as Pro Seal 896 & Pro Seal 898. Use as a stand alone sealer in low traffic areas. It is ideal for sealing retaining walls, garden features and feature limestone. However, high traffic and high staining environments benefit from an extra layer of protection. Apply a final seal coat of Pro Seal 896 for best results. Or use Pro Seal 898 for extra gloss.
Pro Seal 770 is also an excellent grouting binder for polishing concrete floors. It binds fine grinding dust to fill in voids and small pores when used in the polishing process.
Water Based Sealers
4 Litre, 19 Litre
Colour Enhancing, Satin Finish
Oil Repellent, Penetrating, Reduces Marking, Stain Protection
- Stabilises the richer natural tone of powder colour oxides.
- Non-Hazardous Material Classification.
- Adds surface flexibility to cement based construction materials.
- Excellent bridging properties for filling voids in highly porous materials.
- Excellent grouting binder for polished concrete.
- Easy to apply / water clean-up.
– Touch dry: 30-60 minutes
– Recoat: 24 hours
Coverage: 20-25m²/litre depending on surface porosity
Dilution: 1:4 (1 part product : 4 parts water).
Equipment needed: Pump sprayer or WBS CSU (Commercial Spray Unit) & broom
First coat sealer for oxide coloured concrete, decorative concrete, new installation natural stone.
Excellent grouting binder when polishing concrete.
Can be used as a pre-sealer to fill voids in highly porous materials prior to sealing with Pro-Seal 896.
Dilution: Pro Seal 770 is a highly-concentrated product that requires dilution with water prior to application.
Mix the neat product thoroughly prior to dilution.
Suggested dilution rates are:
1:4 (1 part product : 4 parts water)
Application: Diluted solution should be mixed thoroughly prior to application. Apply using the CSU (Commercial Spray Unit) or suitable spray applicator.
Best applied to a wet/damp surface to help draw product into the surface material. Use white colour of the product as a visual aid to achieve even coverage.
Use a soft bristle broom to sweep out any pools that develop.
Allow to dry clear / 24 hours prior to sealing with Pro-Seal 896.
Polished Concrete Grouting Binder:
Apply diluted solution to the surface during the finer wet grinding stage of the polishing process. Seal with Pro-Seal 896 for best results.
Wash all equipment with water after use.
Any overspray on adjacent surfaces such as glass, metal or painted surfaces should be wiped off with a damp rag before the product dries.
Environment & Safety
All WBS Products are environmentally responsible. Pro Seal 770 is an environmentally friendly product that is:
- Contains no petroleum solvents or silicone compounds
- Non-hazardous & Non-Toxic
- <100% biodegradable
- VOC < 2 g/L
Store products in a cool dry area, keep product out of direct sunlight.
Keep out of reach of children, wash up any spills by flushing with water, avoid contact with eyes and skin, for professional use only, keep product out of direct sunlight, store in cool dry area.
Classified as Non-Hazardous Material.
ProtectGuard5.00 out of 5$160.00 – $600.00 (from ~ $5.00/m2 RRP) Select optionsCompare
Pro Seal 896 Concentrate5.00 out of 5$295.00 – $880.00 (from ~ $1.85/m2 RRP) Select optionsCompare
GuardCleaner Eco – Soiled Floors0 out of 5$70.00 – $220.00 (from ~ $3.19/m2 RRP) Select optionsCompare
Guard Remover® Eco – Efflorescence & Cement5.00 out of 5$80.00 – $290.00 (from ~ $3.19/m2 RRP) Select optionsCompare
ProtectGuard MG0 out of 5$360.00 (from ~ $4.80/m2 RRP) Select optionsCompare
ProtectGuard HD0 out of 5$195.00 – $700.00 (from ~ $3.50/m2 RRP) Select optionsCompare