WA Sealers

sealing stone and concrete surfaces

Perth based supplier of innovative paving, stone & concrete cleaning and sealing products

Menu
5.00 out of 5
(7 customer reviews)

Pro Seal 896 Concentrate

  • 4L seals up to 100m2; 19L seals up to 450m2
  • From $1.85/m2 (RRP)
  • Price is exclusive of GST & Shipping.
  • Trade & bulk order discounts available. (Click Here)

$295.00$880.00 ex GST

Clear
THIS MONTH’S TOP SELLERS

Description

ProSeal 896 Concrete Sealer

Pro Seal 896 is a water based acrylic sealer. It was designed by Water Based Sealers in Australia for use in our harsh Australian conditions. This amazing concrete sealer is an eco friendly, non-toxic, UV-stable, breathable and penetrating concrete sealer. It is suitable for use on most porous external surfaces.

Pro Seal will not darken the look of the surface but will add some shine, particularly to smooth surfaces. When used on exposed aggregate it will make the stones shine without significantly altering the mortar. This will enhance the contrast between the two and make the aggregate sparkle. Pro Seal 770 can be used as a first coat to provide some subtle colour enhancement if desired.

Acrylic sealer can be either water based or solvent based. Most types of acrylic sealer are film forming. They produce a thick film with quite weak surface adhesion. Solvent based ones are usually harder wearing but are more brittle and are not breathable. Any expansion and contraction can cause crazing. Any water trapped below the sealer can cause the seal to delaminate and peel off. Most water based ones are breathable, but are soft and flexible and as such aren’t very abrasion resistant.

Pro Seal is a better concrete sealer because:

  • It contains a unique, specially designed, acrylic co-polymer. Once cured this ProSeal will not re-emulsify in water or most other solvents and common chemicals. This guarantees increased strength, durability and chemical resistance.
  • It is a true nano sealer that penetrates deep into porous surfaces, using water as a conduit, for the ultimate in adhesion.
  • As the Pro Seal dries, the polymer chains cross-link together to form a matrix seal. This matrix locks together everything in the top layers of the surface. This provides outstanding strength, stain resistance and durability. The top of this matrix forms a tough film on the surface that acts as a wear layer.
  • It is breathable. Moisture can pass through the sealer as vapour. This enables any water that gets into the substrate to escape without damaging the sealer or the material being sealed. Water can get into the substrate through control joints, sealer failures and through rising damp. Sealers that can’t breathe will delaminate from the surface as the water vapour tries to escape. Therefore, a breathable sealer is a must in all outdoor applications.
  • It can be applied in almost all weather conditions. Solvent acrylic sealer requires the substrate to contain less than 5% moisture and for the surface temperature to be between 5 and 30 degrees Celsius. Pro Seal loves water and is not negatively affected by hot or cold temperatures so you can seal all year round. The only time you can’t seal is while it is raining, simply because the rain will wash away the uncured sealer.

Since Pro Seal 896 is applied to a wet surface, it can be used straight after pressure cleaning. Or applied to new concrete as soon as it’s hard enough to walk on. So, Pro Seal 896 provides the earliest possible stain protection. Why wait for surfaces to dry when you can seal straight away?

Applying Pro Seal 896 on the day of a pour increases the hardness and durability of the concrete by improving curing. Plus, it provides stain resistance before any spills can occur. Apply immediately after power trowelling for a super strong and durable floor finish.

Pro Seal 896 will not turn white in wet conditions, will not yellow, and will never flake or peel.

This product is safe to use and is much better for the environment that solvent based alternatives. It has low VOC’s and is safe to use around children and pets.

Pro Seal 896 concrete sealer is supplied as a concentrate which is diluted with water prior to use. This reduces shipping costs, carbon foot print and overall product cost.

Click here for more information on Pro Seal 896 Concrete Sealer

Additional information

Weight N/A
Size

4 Litre, 19 Litre

Appearance

Colour Enhancing, Satin Finish

Composition

Water Based

Performance

Hydrophobic (Water Repellent), Oil Repellent, Penetrating, Reduces Marking, Stain Protection

Product Type

Sealer

Brand

Water Based Sealers

Features

  • Versatile sealer for all types of new and existing concrete and paved surfaces
  • Developed with MRT Science (Moisture Retention Technology) aiding in the curing of new installation cement based materials
  • Protection for new concrete from DAY ONE
  • Applied to wet substrate, saving time & money
  • Highest level of Oil – Dirt Stain Resistance
  • Minimises surface cracking
  • Eco-Friendly Non Hazardous Material
  • Easy water clean up
  • UV Stable / Industrial Grade Pure Acrylic Sealer
  • Will not delaminate or turn yellow over time
  • Commercial/Industrial Grade

Technical

Curing Time:
– Touch dry: 30-60 minutes

– Foot Traffic: 24 hours
– Vehicle Traffic: 72 hours
Coverage: 
20-25m²/litre depending on surface porosity
Dilution:   1:4 (1 part product : 4 parts water).  Porous substrates diluted 1:3 or pre-treat with Pro Polish 770
Clean-up:  Water
Equipment needed:  Pump sprayer or WBS CSU (Commercial Spray Unit) & broom or microfiber mop
Odour:  None

Uses

Pro-Seal 896 can be used with confidence to seal and provide stain protection for new & old concrete, exposed aggregate, liquid limestone, clay & concrete pavers, and all types of natural stone.

Pro Seal 896:

  • is effective as a curing agent for new concrete
  • is an effective solution for repairing dusting concrete
  • is a penetrating sealer
  • provides superior stain-protection
  • is a great option for pressure clean & seal jobs as it enables you to get the job cleaned & sealed on the same day
  • is an excellent sealing option for driveways, alfrescos, around pools, shopping centres, commercial sites, common walkways etc

Application

Pro Seal 896 comes in a highly concentrated form that requires dilution with water prior to application.  Completely saturate old and dry substrates prior to application to ensure the best possible penetration and performance.

Suggested dilution rates are:

  • Plain Concrete: 1:4 (1 part product 4 parts water)
  • New Exposed Aggregate: 1:3 (1 part product 3 parts water)

Diluted product should be applied at a rate of 3 – 5 m2 per litre depending on surface porosity. For highly porous substrates consider pre-treatment with Pro-Polish 770.

Use a soft bristle broom to sweep out any pools that develop. The sealer can be walked over without concern during the curing process. In many instances a single flood coat is all that is required. If required, a second mist coat can be applied as soon as the first coat is touch dry.

Doesn’t need to be stripped off prior to reapplication.  While Pro-Seal 896 will remain in the substrate and provide protection for 15+ years it is recommended that a re-coat be applied to the surface once every 3 years to maintain best surface appearance. This is particularly relevant in high traffic areas.

Environment & Safety

  • Water-based
  • Contains no petroleum solvents or silicone compounds
  • Non-hazardous and non-toxic
  • 100% biodegradable
  • VOC < 2 g/L
  • Keep out of reach of children.
  • Wash up any spills by flushing with water.
  • It is best practice to clean spills as soon as practical. Most household cleaners can be used on Pro-Seal 896, however use of harsh chemicals may damage or reduce the working life of the sealer.
  • Avoid contact with eyes and skin
  • Keep product out of direct sunlightPro Seal 896 Concrete Sealer Concentrate 2
  • Store in cool dry area
  • Classified as Non-Hazardous Material

Data Sheets

Pro Seal 896 Concentrate 2
Technical Data Sheet – PS896
Pro Seal 896 Concentrate 2
Safety Data Sheet – PS896

7 reviews for Pro Seal 896 Concentrate

  1. 5 out of 5

    Jo

    So easy to apply and an all-round great product! I love the fact that it is eco-friendly too 👍

  2. 5 out of 5

    Mark

    The product is great, saves on application time being able to pressure clean and seal in one day without the hassle of worrying about moisture.

  3. 5 out of 5

    Damien

    Great product, wouldn’t use anything else. James has the knowledge when it comes to sealers to back it up.

  4. 5 out of 5

    Vic

    I used Proseal 896 to seal over 200 sqm around my house.
    Absolutely brilliant outcome!!
    The application was a breeze – I will NEVER pay to have my pavers, pool surrounds etc sealed again.
    James was happy to answer any queries I had.
    Save yourself the hassle and time (getting quotes, waiting for tradies, etc) and do it yourself – so easy!

  5. 5 out of 5

    Mr Blastit

    High performance, cost effective and time saving sealer. We never have any callbacks when using this product and we can clean and seal in one day without any stress. Awesome product!

  6. 5 out of 5

    Nick Kosovich

  7. 5 out of 5

    Miguel Santamaria

    Will shop again 🙂

Add a review

Call Now

Are you in the Construction Business?

Why not apply for a trade account and you can view and order products online at trade pricing?